700r4 corvette servo iroc mod#

That (like the 4 speeds), you could maybe drill new holes If coming from a TH350 you probably have a plate that'sР вЂќР’В«olted to the crossmember and the tranny mounts to The case that's 22.75' from the engine mounting surface),Р вЂќР вЂћnd an optional tailhousing mount that's 27.75' You have two options with the rear mount, the 700R4 has twoР вЂќР’Вifferent mounting provisions, a mount on You'll need to balance and shorten the driveshaft approxР вЂќР в‚¬.5' if coming from a TH-400, not sure about TH-350 (itР Р†Р вЂљРІвЂћСћll be pretty close), it might work but in either case measure in the car! You'll have to bend the 700's dipstick tube a little bit If using a stock tranny from the wrecker talk to BM or TCIР вЂќР вЂћs they have some stuff to set up a stock 700. MyР вЂќР’В§00 is setup to lock up in fourth only, and all I had to do was supply 12 volts (which was already there from the TH400), other people do it differently so talk to your tranny builder about it. Though it depends on your rear gear and rear tire size. Stall speed, also the TTC is worth about 1.5 mpg to ya,

Your cruise rpm in OD is anywhere around the converter's You'll need12 volts down there if you retain the 'torqueР вЂќР’В¬onverter clutch'. Your cooler lines should work with a little bending.

700r4 corvette servo iroc mod#

Mod your old one with some tin snips and a drill. Will be no problem,the V8 700's come in a ChevyР вЂќР’В«ellhousing only. Your Bellhousing and flexplate to converter bolt pattern

has crossmembers, driveshafts, shifter kits, correctР вЂќР’В¬arb throttle shaft brackets, TV Cable brackets,Р вЂќР вЂћnd transmissions available for swaps now (they didnР Р†Р вЂљРІвЂћСћtР вЂќР’В®xist in 1992 when I performed this swap). The 700R4 isР вЂќР вЂћlso lighter and takes some 30HP less to turn than a I put an 89 700R4 in my 71 and it's a wonderful additionР вЂќР вЂЎor the street, I'm getting 19 mpg at 70 toР вЂќР Рѓ0 mph cruise with a 406/375, much better than the 14 to 15 I found this post in a ASU corvette site while i was assigned in Arkansas and saved it.i have posted it as i found it